CNC Vertical Machining Center Vector M-STRONG 0705
74 500 €
Мaterials for processing
Structural and alloy steels • Stainless steel
Grey and ductile cast iron • Aluminum alloys • Brass
Bronze • Copper • Engineering plastics
Technical specifications
| Working area (X × Y × Z), mm | 700 × 500 × 300 |
|---|---|
| Work table, mm | 1200 × 800 |
| Workpiece clamping | T-slots |
| Number of T-slots | 4 |
| T-slot width, mm | 16 |
| Base | Cast iron |
| Drive system (X, Y, Z) | Ballscrews |
| Guide rails | Linear |
| Spindle power, kW | 7,5 |
| Spindle taper | BT40 |
| Spindle speed, rpm | 0 – 6000 |
| Torque, N·m | 60 |
| Spindle cooling | Water-cooled |
| Spindle thermal protection | Built-in sensor |
| Tool changer (ATC) | 8 positions |
| Max. tool diameter, mm | ≤90 |
| Working feed rate, m/min | 0 - 8 |
| Positioning accuracy, mm | ±0,01 |
| Repeat positioning accuracy, mm | ±0,015 |
| Tool cooling | Coolant (flood) |
| Coolant tank capacity, L | 80 |
| Lubrication | Automatic |
| Chip removal | Automatic screw conveyor |
| Motors | Servo motors |
| Control system | SZGH |
| Display | 8,4" |
| Work area illumination | Installed |
| Power supply | 400 V / 50 Hz |
| Compressed air | up to 7 bar |
| Limit switches | Inductive |
| Automatic tool probing | + |
| Automatic workpiece probing | + |
| Rigid tapping | + |
| Overall dimensions (L×W×H), mm | ~ 2500 × 2500 × 2500 |
| Weight, kg | ~ 3500 |
The VECTOR M-STRONG 0705 is the first CNC vertical machining center in the Vector lineup, engineered for high-precision metal machining in small-batch and series production. It is designed to produce housing parts, plates, brackets, flanges, mold and die components, and other technically complex workpieces.
The standard configuration includes everything required to start production: a full protective enclosure, automatic lubrication system, coolant system (flood coolant), automatic screw-type chip conveyor, and the CNC system. The machine is ready to run immediately after installation and commissioning.
Key Advantages:
- Rigid cast iron base and linear guideways deliver high structural rigidity, geometric stability under load, minimal vibration, and extended tool life.
- BT40 spindle with 7.5 kW produces up to 60 N·m of torque, efficiently cutting structural steels, cast iron, and non-ferrous metals.
- 8-position automatic tool changer (ATC) enables multiple operations without manual tool changes, reducing non-productive time and increasing throughput.
- Automatic tool and workpiece probing support cuts setup time, improves machining accuracy, and reduces operator dependency.
- Rigid tapping allows thread cutting without a tension-compression holder, ensuring high thread quality and shorter cycle times.
- Automatic screw-type chip conveyor keeps the work area clean, reduces downtime, and improves operator comfort.
- SZGH CNC controller offers intuitive programming, supports a rotary 4th axis, and provides expandable functionality to match production needs.
- Ballscrews guarantee repeatability of ±0.015 mm — critical for consistent series production.
Typical parts produced on the VECTOR M-STRONG 0705 include gearbox housings, valve bodies, mounting and adapter plates, flanges, brackets, tool holders, die and mold bases, hydraulic adapters, and more.
The machine serves a wide range of industries:
- Mechanical engineering
- Tool and die making
- Mold and die production
- Aerospace and instrumentation
- Repair and service workshops
- Training centers and vocational education facilities