CNC Router Vector 2515F

The VECTOR 2515F is built for shops where processing full-size sheet materials without pre-cutting directly impacts profitability. The 2500×1500 mm work area accepts full sheets of plywood, MDF, plastic, acrylic, and composites, allowing large parts to be machined in a single setup. This cuts prep work, simplifies nesting, and enables the production of one-piece components without joining smaller fragments.

Key Advantages of the VECTOR 2515F:

• The updated design features an optimised gantry structure with fewer welded joints. This minimises thermal distortion during manufacturing and increases the overall rigidity of the assembly under dynamic loads. The result is stable machining geometry at high speeds across the entire 2500×1500 mm field — without the micro-vibrations that can ruin the edge of an expensive acrylic or composite sheet.
• The 2500×1500 mm work area fully matches European and Ukrainian standard sheet sizes. You can load a full sheet of moisture-resistant plywood (2500×1250 mm) without manual pre-cutting — dramatically saving time, reducing waste, and simplifying nest layout. For comparison: a 2100×1300 mm bed would force you to hand-cut 40 cm off every sheet before loading. Composite panels (ACP) or coloured acrylic often come in 1500×3000 mm or 1220×2440 mm formats. The 1500 mm width handles these materials with minimal intermediate cuts.
• The 2.2 kW air-cooled spindle needs no water pump or chiller, simplifying startup and maintenance. A top speed of 24,000 rpm accommodates both tools up to 13 mm in diameter and fine engraving bits.
• Ballscrews on all axes deliver precise motion and stable repeat positioning accuracy of ±0.05 mm. This means consistent results across batch runs.
• The professional controller operates independently from an external PC. The program is loaded via USB, after which the machine runs from its own handheld pendant.
• The semi-automatic lubrication system supplies oil to the motion mechanisms and reduces the need for constant manual attention. The operator only needs to check the oil level periodically.

Applications:

• Furniture production: sliding wardrobe doors, kitchen cabinet fronts, interior doors, decorative panels
• Signage: large-format displays, dimensional letters, acrylic structures
• Plastic fabrication: acrylic glass, PVC, ABS, polycarbonate
• Large-format souvenirs, models, and molds